Made in the USA
Frequently Asked Questions
- How do I determine how tall a pedestal or suspension should be?
- What replaceable parts are available?
- Do you accept credit cards?
- What is heavy grade vinyl?
How do I determine how tall a pedestal or suspension should be?
Pedestal: Measure from the floor to the top of the seat cushion (where operator sits). On a height adjustable pedestal, determine the lowest height that the operator would sit (example 18"). Deduct the seat thickness (listed by each seat) from that height, and that would be the pedestal height at the lowest position. The pedestal and seat would adjust up from that point.
Suspension: Add the operating height of the suspension (example: 6.5" on the low suspension) to the seat thickness of the seat (example: 7.5" on a highback seat). The total of those two numbers would be the height from the floor to the top of the seat cushion when operator is sitting on the seat.
Jump to Top of Page
What replaceable parts are available?
Seats: The seats have replaceable frames, seat tracks, seat cushions, backrests, and armrests.
Suspensions: The suspensions have all replaceable parts.
Misc: Armpads and cushions are available in custom sizes and thickness.
Jump to Top of Page
Do you accept credit cards?
We accept VISA and Mastercard.
Jump to Top of Page
What is heavy grade vinyl?
Our heavy grade vinyl has:
TECHNICAL DATA AND TYPICAL PROPERTIES *
Normal Weight -- 44 oz per linear yard
Contents -- 100% Virgin Vinyl
Cold Crack -- minus 40 deg F
UV Stabilized Pigments -- (300/hrs Min.)
Oil Resistant
Abrasion Resistant
Manufactured to Meet Flammability Requirements: *
Motor Vehicle Safety Standard 302
California Technical Bulletin 117 Sect. E
Clean with mild soap and water
* This term and any corresponding data refer to typical performance in the specific tests indicated and should not be construed to imply the behavior of this or any other material under actual conditions.
Jump to Top of Page